Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur télécharger pdf (Page 56)

Cut to Length with Multi Stroke Program

PRESS F1 OR F2

Pressing the F1 or F2 keys will produce one of the following displays. The

lower the number entered, the longer the ramp cycle. Press F1 or F2 now.

ENTER ACCEL RAMP % JOB NUMB=00 ENTER IN

MAX%=75000 RPM/SEC PERCENT MAX VEL=000%

MAXIMUM ACCEL %=002% PRESS F4 KEY ONCE

F4=EXIT (RAMP MENU) CORRECT # IS ENTERED

Multi-stroke Program Explanation

The Multi-stroke program is a cut-to-length program with the option of cutting

different lengths with different quantities for each length within the same

program or job

number.

The program consists of 10 jobs with 10 sequences per job. Each sequence

has multiple repeats with a programmable timed output to the cutter.

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (55 of 66) [12/10/2001 3:44:58 PM]

1 2 ... 51 52 53 54 55 56 57 58

Pas de commentaire

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur Page 56