Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur télécharger pdf (Page 2)

Cut to Length with Multi Stroke Program

The standard multi-stroke program is a multiple feed length program within a

specified job number. The different programmed feed lengths will be referred

to as sequences. Each sequence can be repeated many times with 0 being

entered for no repeats. Although this is the standard program, Rapid Air can

program other configurations in any combination to meet the customer’s

requirements.

The standard multi-stroke program has 10 jobs with 10 programmable

sequences per job. Each sequence can be a different feed length which can

be repeated multiple times. The following chart depicts the previous write-up.

GAG FEED

TOTAL JOBS 10

TOTAL SEQUENCES 10

TOTAL REPEATS 10

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (1 of 66) [12/10/2001 3:44:57 PM]

1 2 3 4 5 6 7 ... 57 58

Pas de commentaire

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur Page 2