Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur télécharger pdf (Page 49)

Cut to Length with Multi Stroke Program

F3=AUTOMATIC

CYCLE

If the F2 key was pressed then the servo will be in the auto total mode and the

following screen appears.

AUTOMATIC MODE

JOB =00 NUMBER OF SEQ=00

TOTAL COUNTER=000000

F4=EXIT (AUTO CYCLE)

Pressing the F4 key, stops the automatic cycle and the main menu screen

appears.

MAIN MENU

F1=JOB # F2=MANUAL

F3=AUTOMATIC CYCLE

F4=REVIEW JOB PROGRAM

F3=AUTOMATIC CYCLE

If the feed has been properly set up, tested in manual, press electrically

interlocked with feed, feed and pilot switches wired to the correct terminals,

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (48 of 66) [12/10/2001 3:44:58 PM]

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 57 58

Pas de commentaire

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur Page 49