Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur télécharger pdf (Page 30)

Cut to Length with Multi Stroke Program

ROLLER AND GEAR BOX ASSEMBLY

At this stage of disassembly, all field maintenance components are exposed

and easily accessible. No further field service should be necessary on the

roller and gear box assembly unless the gear train is suspected of a

malfunction. The drive rolls should be checked for erronious wear pattern

while they are exposed and cleaned before reassembly.

MAINTENANCE PROCEDURES

DAILY WEEKLY

MONTHLY

Wipe off feed rolls Check wear pattern of rolls Check oil

level

Clean any dirt from Check

cables for cuts

servo unit or wear

Clean any dirt from

operators pendant

file:///C|/Web_develop/cut_to_length_with_multi_stroke_.htm (29 of 66) [12/10/2001 3:44:57 PM]

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 57 58

Pas de commentaire

Rapid-air CUT-TO-LENGTH WITH MULTI-STROKE Manuel d'utilisateur Page 30