Rapid-air MINI-SERVO FEED: MS2, MS4 & MS8. 115vac, 1ph, Manuel d'utilisateur télécharger pdf (Page 10)

NEVER – Put screwdrivers or foreign materials in feed rolls

NEVER – Hold onto material as it is being fed through the servo

NEVER – Wear neckties around the servo feed rolls

NEVER – Force the rolls open by prying on them

NEVER – Modify the mechanical aspects of the servo feed

CAUTION – Contact the factory before drilling any holes in the unit

CAUTION – Wear proper eye protection when working around the servo

CAUTION – Do not wear loose clothing around the servo feed rolls

PreCAUTions & sAfeTy

Precautions & safety

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Rapid-air MINI-SERVO FEED: MS2, MS4 & MS8. 115vac, 1ph, Manuel d'utilisateur Page 10